How does Zinc alloy die casting die from China manufacturer carry out device inspection? Let's have a simple understanding together!
To view the mold, first check the sign, understand the basic information, and then check the overall dimensions of the mold, whether the length and width dimensions can be installed on the selected die-casting machine, and whether it is within the range of the tie rod interval. If it is a hydraulic cylinder, check whether it can be installed directly, such as No, it needs to be determined whether it can be connected to the mold after the mold is installed.

Next, check the total height of the mold, the total height should be greater than the opening of the machine, and the total height of the mold plus the opening stroke of the machine should be less than the opening stroke of the machine; then check the opening stroke, whether there is a sufficient interval after the mold is opened. Lower the casting, check whether the size and position of the mold fixing hole, the hoisting groove and the groove are appropriate, whether the position of the mold cooling water pipe installation interferes, whether the position of the ejector corresponds to the machine, whether there is a tooth pattern in the position of the tie rod, the size of the sprue sleeve and the nozzle of the machine and whether the fit is appropriate.
The mold is one of the important components of the zinc alloy die-casting machine. For the quality of production, if necessary, the mold should be opened to check the mold cavity, and the joint surface of the mold device should be cleaned and wiped clean. There must be no oil stains and sundries. The front liquid must be removed and cleaned before the device can be transferred.
The above is a brief introduction to the knowledge of Zinc alloy die casting die from China manufacturer for device inspection.