新闻资讯

New center

Check category
/
/
/
Wholesale Die casting processing products

Wholesale Die casting processing products

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-26 14:38
  • Views:

(Summary description)Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.

Wholesale Die casting processing products

(Summary description)Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content.

  • Categories:Industry news
  • Author:
  • Origin:
  • Time of issue:2022-07-26 14:38
  • Views:

How much do you know about die casting? Let's follow the Wholesale Die casting processing products editor for a brief understanding!
1. Hot chamber die casting
Hot chamber die casting, sometimes referred to as gooseneck die casting, involves a pool of molten, semi-liquid metal that fills a mold under pressure. At the start of the cycle, the machine's piston is retracted, allowing molten metal to fill the gooseneck. A pneumatic or hydraulic piston squeezes the metal and fills it into a die. The advantages of this system include high cycle speed (approximately 15 cycles per minute), ease of automation, and ease of melting the metal. Disadvantages include the inability to die-cast metals with higher melting points, as well as the inability to die-cast aluminum, which would carry iron out of the molten pool. Thus, hot chamber die casting machines are generally used for alloys of zinc, tin and lead. Moreover, hot chamber die casting is difficult to use for die casting large castings, which are usually die casting of small castings.

Wholesale Die casting processing products
2. Cold chamber die casting
Cold chamber die casting can be used when die casting metals that cannot be used in the hot chamber die casting process, including aluminum, magnesium, copper, and zinc alloys with higher aluminum content. In this process, the metal needs to be melted first in a separate crucible. A quantity of molten metal is then transferred to an unheated injection chamber or nozzle. These metals are injected into the mold by hydraulic or mechanical pressure. The biggest disadvantage of this process is the long cycle time due to the need to transfer the molten metal into the cold chamber. Cold chamber die-casting machines are also divided into vertical and horizontal types. Vertical die-casting machines are usually small machines, while horizontal die-casting machines have various models.
The above is the editor of Wholesale Die casting processing products: a brief introduction to some knowledge about die casting.

Keyword:

推荐新闻

Process characteristics of die-casting aluminum parts
Process characteristics of die-casting aluminum parts
Good product quality: high dimensional accuracy of castings, generally equivalent to grade 6~7, even up to grade 4; good surface finish, generally equivalent to grade 5~8;
See more information
Good product quality: high dimensional accuracy of castings, generally equivalent to grade 6~7, even up to grade 4; good surface finish, generally equivalent to grade 5~8;
The difference between aluminum alloy shell and stainless steel shell
The difference between aluminum alloy shell and stainless steel shell
With the continuous development and improvement of processing technology, stainless steel and aluminum alloy casings will be more and more used in various fields.
See more information
With the continuous development and improvement of processing technology, stainless steel and aluminum alloy casings will be more and more used in various fields.
Analysis of the reasons for the scrapping of die-casting mold manufacturing
Analysis of the reasons for the scrapping of die-casting mold manufacturing
Avoid sharp corners as much as possible in mold design, and the positions of holes and grooves should be arranged reasonably.
See more information
Avoid sharp corners as much as possible in mold design, and the positions of holes and grooves should be arranged reasonably.
Previous page
1
2
21

Foshan Nanhai Jiawei metal products Co., Ltd

Contact information:18928682636(Miss Liang)/18928682621(Mr. Tang)

Company phone:0757-85103282

Company fax:0757-85103183

Company email:sunny@nhjiawei.com / jia_tangvic@163.com

Marketing Center: No.90, hongganglihe Road, Lishui Town, Nanhai District, Foshan City

Production base: b3-1, zone 3, Enping Industrial Park, Jiangmen industrial transfer park (Enping Guangen profile Co., Ltd.)

language
中国
韩国
韩国
韩国
韩国
韩国
Copyright © 2021 Foshan Nanhai Jiawei metal products Co., Ltd 粤ICP备19125561号 Powerby :300.cn