Wire production is mainly produced by drawing process. Products include rivet wire, welding rod and wire. Billets are produced by extrusion, rolling or continuous casting and rolling. The extrusion method produces billets with greater flexibility and better product performance. The rolling method and the continuous casting and rolling method are suitable for the production of billets of a single alloy variety, and have high production efficiency.

Forging production is mainly used in aircraft and machine building. Forgings are divided into free forgings and die forgings, and the blanks are cast and extruded. The largest die forging hydraulic press is 70,000 tons, and the projected area of ​​the largest forging is 4.5 m2. The critical deformation rate of aluminum alloy is about 5 to 15%. In order to avoid the formation of coarse grains, the deformation rate of die forging should generally be greater than 15%. In order to reduce uneven deformation, multi-directional free forging is often used.
Production of pipes, bars and profiles The usual process is: first hot extrusion to make billets, and then rolling (or drawing), finishing and heat treatment to make finished products. It can also be directly made into finished products by hot extrusion. Now it has been developed from short ingots to long ingots. According to the extrusion force of the extruder, a uniform diameter ingot is used to extrude various Profiles and pipes, the length of the products can reach more than 60 meters, after stretching and straightening, they are cut to the required length.